TP-Link TL-WA500G User Guide - Page 22

Network, TL-WA500G, Network, Dynamic IP, Static IP, IP Address, Subnet Mask, Gateway - user manual

Get TP-Link TL-WA500G PDF manuals and user guides
UPC - 845973051105
View all TP-Link TL-WA500G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

TL-WA500G 54M Wireless Access Point User Guide 4.3 Network The Network option allows you to customize your local network manually by changing the default settings of the AP. Selecting Network will enable you to configure the IP parameters of Network on this page. Figure 4-4 Network ¾ Type - Select Dynamic IP to get IP address from DHCP server or select Static IP to configure IP address manually from the drop-down list. ¾ IP Address - Enter the IP address of your AP in dotted-decimal notation (factory default setting is 192.168.1.254). ¾ Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. ¾ Gateway - The gateway should be in the same subnet with your IP address. ¾ MAC Address - The physical address of the AP. The value can't be changed. ) Note: If you change the IP Address, you must use the new IP Address to login the AP. If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the DHCP sever will not take effect, until they are re-configured. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
TL-WA500G
54M Wireless Access Point User Guide
4.3
Network
The
Network
option allows you to customize your local network manually by changing the default
settings of the AP.
Selecting
Network
will enable you to configure the IP parameters of Network on this page.
Figure 4-4 Network
¾
Type -
Select
Dynamic IP
to get IP address from DHCP server or select
Static IP
to
configure IP address manually from the drop-down list.
¾
IP Address -
Enter the IP address of your AP in dotted-decimal notation (factory default
setting is 192.168.1.254).
¾
Subnet Mask -
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
¾
Gateway
-
The gateway should be in the same subnet with your IP address.
¾
MAC Address
-
The physical address of the AP. The value can't be changed.
)
Note:
If you change the IP Address, you must use the new IP Address to login the AP.
If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the DHCP
sever will not take effect, until they are re-configured.
15