TP-Link TL-WR702N TL-WR702N V1 User Guide - Page 137
TL-WR702N, ASCII, Hexadecimal, Group Key Update Period, DHCP Settings, DHCP Clients List, Address
View all TP-Link TL-WR702N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
TL-WR702N 150Mbps Wireless N Nano Router For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters. For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, the length should be between 8 and 64 characters. Please also note the key is case sensitive, this means that upper and lower case keys will affect the outcome. It would also be a good idea to write down the key and all related wireless security settings. • Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. Be sure to click the Save button to save your settings on this page. 7.7 DHCP Figure 7-10 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 7-10): DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. 7.7.1 DHCP Settings Choose menu "DHCP → DHCP Settings", and then you can configure the DHCP Server on the page as shown in Figure 7-11. The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the Router in the LAN. - 131 -