TP-Link TL-WR702N TL-WR702N V1 User Guide - Page 158
The number of Ping packets for a Ping connection. The default is 4.
View all TP-Link TL-WR702N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
TL-WR702N 150Mbps Wireless N Nano Router Figure 8-15 Diagnostic Tools ¾ Diagnostic Tool - Check the radio button to select one diagnostic tool. • Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway. • Traceroute - This diagnostic tool tests the performance of a connection. ) Note: You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries. ¾ IP Address/Domain Name - Type the destination IP address (e.g. 202.108.22.5) or Domain name (e.g.http://www.tp-link.com). ¾ Pings Count - The number of Ping packets for a Ping connection. The default is 4. ¾ Ping Packet Size - The size of Ping packet. The default is 64. ¾ Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection is overtime. The default is 800. - 152 -