TP-Link TL-WR702N TL-WR702N V1 User Guide - Page 73
TL-WR702N, Authentication Type, Password, Wireless, Wireless Security
View all TP-Link TL-WR702N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
TL-WR702N 150Mbps Wireless N Nano Router ¾ Authentication Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the authorization type of the Root AP. ¾ Password - If the AP your Router is going to connect needs password, you need to fill the password in this blank. Be sure to click the Save button to save your settings on this page. ) Note: 1. The operating distance or range of your wireless connection varies significantly based on the physical placement of the Router. For best results, place your Router. z Near the center of the area in which your wireless stations will operate. z In an elevated location such as a high shelf. z Away from the potential sources of interference, such as PCs, microwaves, and cordless phones. z Away from large metal surfaces. 2. Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the Router. 5.6.2 Wireless Security Choose menu "Wireless → Wireless Security", and then you can configure the security settings of your wireless network. There are three wireless security modes supported by the Router: WEP (Wired Equivalent Privacy), WPA/WPA2 and WPA-PSK/WPA2-PSK. - 67 -