TP-Link TL-WR702N TL-WR702N V1 User Guide - Page 21

WPA-PSK/WPA2-PSK - default password

Get TP-Link TL-WR702N PDF manuals and user guides View all TP-Link TL-WR702N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

TL-WR702N 150Mbps Wireless N Nano Router • 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. • 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. Select the desired wireless mode. When 802.11g mode is selected, only 802.11g wireless stations can connect to the Router. When 802.11n mode is selected, only 802.11n wireless stations can connect to the AP. It is strongly recommended that you set the Mode to 802.11b/g/n, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the Router. ¾ Channel Width - Select any channel width from the pull-down list. The default setting is automatic, which can automatically adjust the channel width for your clients. ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. It is recommended strongly that you choose one of following options to enable security. ¾ WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase. • PSK Password - You can enter ASCII or Hexadecimal characters. The default password is the last unique eight numbers of each Router's MAC address For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters. For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, the length should be between 8 and 64 characters. Please also note the key is case sensitive, this means that upper and lower case keys will affect the outcome. It would also be a good idea to write down the key and all related wireless security settings. 2. Click the Next button. You will then see the Finish page. If you don't make any change on the Wireless page, you will see the Finish page as shown in Figure 3-7. Click the Finish button to finish the Quick Setup. Figure 3-7 Quick Setup - Finish If there is something changed on the Wireless page, you will see the Finish page as shown in Figure 3-8. Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup. - 15 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
TL-WR702N
150Mbps Wireless N Nano Router
- 15 -
•
11bg mixed -
Select if you are using both 802.11b and 802.11g wireless clients.
•
11bgn mixed -
Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
Select the desired wireless mode. When 802.11g mode is selected, only 802.11g wireless
stations can connect to the Router. When 802.11n mode is selected, only 802.11n wireless
stations can connect to the AP. It is strongly recommended that you set the Mode to
802.11b/g/n
, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the
Router.
¾
Channel Width -
Select any channel width from the pull-down list. The default setting is
automatic, which can automatically adjust the channel width for your clients.
¾
Disable Security -
The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without encryption. It is
recommended strongly that you choose one of following options to enable security.
¾
WPA-PSK/WPA2-PSK -
Select WPA based on pre-shared passphrase.
•
PSK Password
- You can enter
ASCII
or
Hexadecimal
characters. The default
password is the last unique eight numbers of each Router’s MAC address
For
ASCII
, the key can be made up of any numbers 0 to 9 and any letters A to Z, the
length should be between 8 and 63 characters.
For
Hexadecimal
, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case
keys will affect the outcome. It would also be a good idea to write down the key and
all related wireless security settings.
2.
Click the
Next
button. You will then see the
Finish
page.
If you don’t make any change on the
Wireless
page, you will see the
Finish
page as shown
in Figure 3-7. Click the
Finish
button to finish the
Quick Setup
.
Figure 3-7 Quick Setup - Finish
If there is something changed on the Wireless page, you will see the
Finish
page as shown
in Figure 3-8. Click the
Reboot
button to make your wireless configuration take effect and
finish the Quick Setup.