TP-Link TL-WR702N TL-WR702N V1 User Guide - Page 17
TL-WR702N, Please check the connection following these steps - ip address
View all TP-Link TL-WR702N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
TL-WR702N 150Mbps Wireless N Nano Router Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router has failed. Figure 3-2 Failure result of Ping command Please check the connection following these steps: 1. Is the connection between your PC and the Router correct? ) Note: The LED of LAN/WAN ports which you link to on the Router should be lit. 2. Is the TCP/IP configuration for your PC correct? ) Note: If the Router's IP address is 192.168.0.254, your PC's IP address must be within the range of 192.168.0.1 ~ 192.168.0.253. - 11 -
TL-WR702N
150Mbps Wireless N Nano Router
- 11 -
Figure 3-1
Success result of Ping command
¾
If the result displayed is similar to the Figure 3-2, it means the connection between your PC
and the Router has failed.
Figure 3-2
Failure result of Ping command
Please check the connection following these steps:
1.
Is the connection between your PC and the Router correct?
)
Note:
The LED of LAN/WAN ports which you link to on the Router should be lit.
2.
Is the TCP/IP configuration for your PC correct?
)
Note:
If the Router's IP address is 192.168.0.254, your PC's IP address must be within the range of
192.168.0.1 ~ 192.168.0.253.