TP-Link TL-WR702N TL-WR702N V1 User Guide - Page 69

LAN, 5.3 MAC Clone

Get TP-Link TL-WR702N PDF manuals and user guides View all TP-Link TL-WR702N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

TL-WR702N 150Mbps Wireless N Nano Router 5.5.2 LAN Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on the screen as below. Figure 5-12 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your Router in dotted-decimal notation (factory default: 192.168.0.254). ¾ Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. ) Note: 1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router. 2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configured automatically，while the Virtual Server and DMZ Host will not take effect until they are re-configured. 5.5.3 MAC Clone Choose menu "Network → MAC Clone", and then you can configure the WAN MAC address on the screen below, as shown in Figure 5-13: Figure 5-13 MAC Address Clone - 63 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
TL-WR702N
150Mbps Wireless N Nano Router
- 63 -
5.5.2 LAN
Choose menu “
Network
→
LAN
”, and then you can configure the IP parameters of the LAN on
the screen as below.
Figure 5-12
LAN
¾
MAC Address
-
The physical address of the LAN ports, as seen from the LAN. The value
can't be changed.
¾
IP Address -
Enter the IP address of your Router in dotted-decimal notation (factory default:
192.168.0.254).
¾
Subnet Mask -
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
)
Note:
1.
If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2.
If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically
，
while the Virtual Server and
DMZ Host will not take effect until they are re-configured.
5.5.3 MAC Clone
Choose menu “
Network
→
MAC Clone
”, and then you can configure the WAN MAC address
on the screen below, as shown in Figure 5-13:
Figure 5-13
MAC Address Clone