Toshiba 42TL515U Owners Manual - Page 88
Programming, the remoteto, operateotherdevices
View all Toshiba 42TL515U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Operating other devices Your TV remote control has one dedicated TV mode and three programmable multi-brand SAT, BD/DVD, and AUX. modes: CABLE/ Note: To operate a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must program the remote. TV CABLE/SAT BD/DVD AUX Toshiba TV Toshiba Satellite receiver Toshiba Blu-ray Disc l'_player Onkyo Receiver TV CABLE/SAT BD/DVD AUX Toshiba TV Multi-brand video/audio devices Note: If you cannot program the rV's remote to operate your device or some of its features, use the device's remote or the controls on the device. Programmingthe remoteto operateother devices Devicecodesetup Find the code for your device brand in the remote control device code table (_ p. 91-96). If multiple codes are listed, try each one separately until you find one that works. 2 Press a mode select button (CABLE/SAT, BD/DVD, or AUX). The button blinks 3 times. 3 While holding down _, input the 4-digit code for your device. 2 blinks Valid code 1 long blink Invalid code 4 Point the remote at the device. Press PowEt_o test the code. The device responds. The device does not respond, Valid code hwalid code Repeat the procedure, using another code 5 When programming is complete, test all necessary keys on the TV's remote that operate your device. If some keys are not operational, repeat the device code setup using another code (if other codes are listed for your device). 6 To control the TV, press TV. 7 If your VCR does not respond to the codes for your VCR brand, and has a switch labeled VCR1/VCR2, set the switch to the other position, then reprogram the remote control. Note: Every time you change the batteries, you must reprogram the remote. 88