Toshiba DKT3210-SD User Guide - Page 105

FB04 - Flash timing 100 ms units, FB05 - ACO Pad, FB06 - Country Code, FB07 - Auto Hold ACO line

Get Toshiba DKT3210-SD - Digital Phone - Charcoal PDF manuals and user guides View all Toshiba DKT3210-SD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 105 highlights

IPT2010-SDC IPT2010-SDC Programming 4. Press FB04 - Flash timing (100 ms units) (Hook Flash to the CO timing is +/- 10 ms). Press Hold. Go to the next Step or, if you are finished programming, go to Step 9. Flash is used to answer Call Waiting and access Centrex features and should normally be set to default. 1 ~ 20 (Default: 6 (600 ms)) 5. Press FB05 - ACO Pad - This affects only the CO Line pad level. This is the same function as the pad jumper on the CO Line card. The IPT pad levels are set by the CIX system PAD Table programming. Press Hold. Go to the next Step or, if you are finished programming, go to Step 9. 2 = 3 dB pad. Set 3dB if the local CO is very close to your telephone connection causing the audio volume level to be too high. 1 = No pad (Default) Note During installation, leave ACO Transmit and Receive levels (FB20 and FB19) at default. Use FB05 to adjust ACO level. If additional adjustment is needed, then use FB20 and FB19. 6. Press FB06 - Country Code, set to 0 for United States and Canada. Press Hold. Go to the next Step or, if you are finished programming, go to Step 9. 7. Press FB07 - Auto Hold ACO line (No Auto Hold releases the ACO line). Press Hold. Go to the next Step or, if you are finished programming, go to Step 9. 2 = Auto Hold 1 = No auto hold 8. Press FB08 - LCD Language for ACO. Select the display language then, press Hold. 1 = US English 3 = British English 2 = French 4 = Spanish 9. Press Hold again to save the changes. 10.Lift, then replace hand set to exit programming mode. FB09 ~ FB20 - Do not change. Strata CIX and CTX IPT/DKT Telephone 08/07 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
IPT2010-SDC
IPT2010-SDC Programming
Strata CIX and CTX IPT/DKT Telephone
08/07
87
4. Press
FB04 – Flash timing (100 ms units)
(Hook Flash to the CO timing is +/- 10
ms). Press
Hold
. Go to the next Step or, if you are finished programming, go to
Step 9
. Flash is used to answer Call Waiting and access Centrex features and
should normally be set to default.
1 ~ 20 (Default: 6 (600 ms))
5. Press
FB05 – ACO Pad
- This affects only the CO Line pad level. This is the same
function as the pad jumper on the CO Line card. The IPT pad levels are set by the
CIX system PAD Table programming. Press
Hold
. Go to the next Step or, if you
are finished programming, go to
Step 9
.
2 = 3 dB pad. Set 3dB if the local CO is very close to your telephone connection
causing the audio volume level to be too high.
1 = No pad (Default)
Note
During installation, leave ACO Transmit and Receive levels (FB20 and FB19)
at default. Use FB05 to adjust ACO level. If additional adjustment is needed,
then use FB20 and FB19.
6. Press
FB06 – Country Code
, set to 0 for United States and Canada. Press
Hold
.
Go to the next Step or, if you are finished programming, go to
Step 9
.
7. Press
FB07 – Auto Hold ACO line
(No Auto Hold releases the ACO line). Press
Hold
. Go to the next Step or, if you are finished programming, go to
Step 9
.
2 = Auto Hold
1 = No auto hold
8. Press
FB08 – LCD Language for ACO
. Select the display language then, press
Hold
.
1 = US English
3 = British English
2 = French
4 = Spanish
9. Press
Hold
again to save the changes.
10.Lift, then replace hand set to exit programming mode.
FB09 ~ FB20 - Do not change.