Yamaha CLP-380 Owner's Manual - Page 119

Attach A., Connect the speaker cord., Keyboard Stand Assembly, Appendix

Get Yamaha CLP-380 PDF manuals and user guides View all Yamaha CLP-380 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 119 highlights

Keyboard Stand Assembly 4. Attach A. 4-1 Adjust the position of A so that the left and right ends of A will project beyond E and F equally (as seen from the rear). 4-2 Secure A using two 6 x 16mm short screws from the rear. 4-3 Secure A using four 6 x 16mm short screws from the front. 4-1 5. Connect the speaker cord. 5-1 Remove the twist tie attaching the speaker cord. 5-2 Insert the speaker cord plug into the connector so that the tab extends toward the front when viewed from the rear. 5-2 4-2 4-3 4-4 Firmly tighten the screws from the upper parts you temporarily fastened in step 2-4 above (assembly B). 6. Connect the pedal cord. 6-1 Insert the pedal cord plug into the [PEDAL] connector. 6-2 Attach the cord holders to the instrument, then clip the cord into the holders. At this time, be careful that the pedal cord isn't loose between the plug and cord holder. 6-3 Use a twist tie to bundle the pedal cord. 6-1 B 6-2 6-3 4-4 Appendix CLP-380 Owner's Manual 119

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
Keyboard Stand Assembly
CLP-380 Owner’s Manual
119
Appendix
4.
Attach A.
4-1
Adjust the position of A so that the left and right
ends of A will project beyond E and F equally (as
seen from the rear).
4-2
Secure A using two 6 x 16mm short screws from
the rear.
4-3
Secure A using four 6 x 16mm short screws from
the front.
4-4
Firmly tighten the screws from the upper parts
you temporarily fastened in step 2-4 above
(assembly B).
5.
Connect the speaker cord.
5-1
Remove the twist tie attaching the speaker cord.
5-2
Insert the speaker cord plug into the connector so
that the tab extends toward the front when viewed
from the rear.
6.
Connect the pedal cord.
6-1
Insert the pedal cord plug into the [PEDAL]
connector.
6-2
Attach the cord holders to the instrument, then
clip the cord into the holders. At this time, be
careful that the pedal cord isn’t loose between the
plug and cord holder.
6-3
Use a twist tie to bundle the pedal cord.
4-2
4-1
4-3
B
4-4
5-2
6-1
6-2
6-3