Yamaha CLP-380 Owner's Manual - Page 73

Basic Operation Connections 5 AUX IN [L/L+R], [R] jacks The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the Clavinova's speakers. Refer to the diagram below and use audio cables for connection. CAUTION When the Clavinova's AUX IN jacks are connected to an external device, first turn on the power to the external device, then to the Clavinova. Reverse this order when you turn the power off. Clavinova Phone plug (standard) AUX IN TIP The Clavinova's [MASTER VOLUME] dial setting affects the input signal from the AUX IN jacks, but the [REVERB], [CHORUS], and BRILLIANCE [MELLOW] [BRIGHT] (page 25) settings do not. TIP If you connect the Clavinova to a monaural device, use only the AUX IN [L/L+R] jack. TIP Use audio cables and adaptor plugs with no resistance. Audio cable Plug shape depends on the device. AUX OUT Tone Generator 6 AUX OUT [L/L+R] [R] jacks These jacks let you connect the Clavinova to external powered speaker systems, for playing in larger venues at higher volumes. CAUTION When the Clavinova's AUX OUT jacks are connected to an external system, first turn on the power to the Clavinova, then to the external system. Reverse this order when you turn the power off. Clavinova Powered speaker TIP When the sound from the AUX OUT jacks is routed to the AUX IN jacks, the input sound will be output from the speaker of the CLP. The output sound may be excessively loud and may cause noise. TIP If you connect the Clavinova to a monaural device, use only the AUX OUT [L/L+R] jack. AUX OUT Phone plug (standard) AUX IN Phone plug (standard) Cable The Clavinova's [MASTER VOLUME] setting will affect the sound that is output from AUX OUT jacks. When the Clavinova's AUX OUT jacks are connected to an external speaker and you want to turn off the speaker sound of the Clavinova, switch the speaker off (page 99). Moreover, the tone quality of the instrument sound output from the speakers and the headphones changes automatically to the appropriate settings according to how the instrument is being used (see chart below). Speakers sound Speakers do not sound No plugs to connected to AUX OUT jacks Plugs connected to AUX OUT jacks Speakers On Speakers Normal Speakers Off (Headphones Switch) Speakers On Speakers Normal Speakers Off (Headphones Switch) Headphones Optimum equalization Flat Flat Flat connected for speakers applied Flat Flat Headphones Optimum equalization Optimum equalization Flat Flat not connected for speakers applied for speakers applied Flat Flat CLP-380 Owner's Manual 73