Yamaha D24 Owner's Manual - Page 116
Test Play Mode
View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
112 Chapter 10-Editing Parts Test Play Mode 7 Having selected "TEST PLAY," press the [ENTER] button. "TIME COMP-FROM TR nn" appears on the display ("nn" being the source track containing the material to be processed). 8 Use the JOG/DATA dial to select the source track. You can select individual tracks or track pairs: 1-8 or 1/2-7/8. To process a virtual track, assign it to a main track first, and then process the main track. 9 Press the [ENTER] button. "TIME COMP-ST MARK IN" appears on the display ("ST" being the start point of the part to be processed). 10 Use the JOG/DATA dial to select one of the following points: MARK IN-LAST REC IN point MARK OUT-LAST REC OUT point MARK A-A point MARK B-B point LOC MEM 01-99-a locate memory from 1 through 99 11 Press the [ENTER] button. "TIME COMP-ST 00:00:00.00.0" appears on the display ("00:00:00.00.0" being the position of the selected point). 12 Use the JOG/DATA dial or keypad to adjust the start position, and then press the [ENTER] button. "PLAY OK-ENTER TO PLY" appears on the display. 13 Press the [ENTER] button to audition the source track. "TCMP PLAY-ENTER TO STP" appears on the display and playback begins at the specified start point and continues to the end of the project. Auditioning the Time Compression function requires a lot of processing power, so for monitoring purposes only, the source tracks are mixed to tracks 7 and 8, with odd-numbered tracks appearing on the output and meter of track 7, and even-numbered tracks appearing on the output and meter of track 8. This mix can also be monitored via the PHONES, or if the Coaxial I/O is assigned to tracks 7 and 8 (see "Assigning the Coaxial Input & Output" on page 188), the COAXIAL STEREO DIGITAL OUTPUT. Track outputs 1 through 6 do not output anything when these functions are used. 14 Press the [ENTER] button to stop playback. Use the [ENTER] button to audition the source track again. 15 Press the [CANCEL] button several times to return to the mode selection display. "MODE-TEST PLAY" appears on the display, and from here you can select either "TEST PLAY" or "REC." D24-Owner's Manual