Yamaha D24 Owner's Manual - Page 69
Storing Locate Points
View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
64 Chapter 6-Quick Locate Storing Locate Points Up to 99 locate points can be stored with each project using the Locate Memory Store function. Locate points can be stored while the D24 is stopped or during rewind, fast forward, playback, recording, or rehearsal. 1 Display the position that you want to store on the 2nd line of the display. You can do this by capturing the current position by pressing the [CAPTURE] button, entering a value by using the keypad or JOG/DATA dial, or recalling the LAST REC IN, OUT, A, or B point by pressing the corresponding button. 2 Press the [LOC MEM STORE] button. The LOC MEM STORE indicator lights up,"STORE MEM nn" (the flashing "nn" being the memory number), and the value already stored in the locate memory appear on the display. If no value has been stored in the memory is displayed. 3 Use the keypad or JOG/DATA dial to select a locate memory from 1 to 99. To select locate memory 15, for example, press [1] and then [5]. To cancel your selection and select another locate memory, press the [CANCEL] button, and then reenter the locate memory number. 4 Press the [ENTER] button to store the locate point. The stored locate point appears on the 2nd line of the display. 5 Press the [LOC MEM STORE] button to leave the Locate Memory Store function. The LOC MEM STORE indicator goes out. Locate points are stored with sub-frame accuracy. They are saved to disk automatically, and loaded from disk automatically when a project is selected. In the following example, the position 00:01:00.00.0 is captured and stored to locate memory 5. 00:00:00.00.0 00:01:00.00.0 CAPTURE LOC MEM STORE 5 ENTER LOC MEM STORE D24-Owner's Manual