Yamaha D24 Owner's Manual - Page 78

Auto Punch In/Out Recording 73 Auto Punch In/Out Recording This section explains how to perform auto punch in/out recording for real. With the Auto Input monitoring function turned on, playback and input monitor switching is performed automatically at the LAST REC IN and OUT points. See "Monitoring" on page 42 for more information. The following illustration shows the procedure for auto punch-in/out recording. 1-1 1 READY 2 2-1 2 3-1 3 4-1 4 5-1 5 6-1 6 7-1 7 8-1 8 Pre-roll point LAST REC IN point LAST REC OUT point Post-roll point Locate Play Record Play 2 RECORD READY AUTO PUNCH REC PLAY 1 Set the LAST REC IN and OUT points. See "Setting the LAST REC IN & OUT Points" on page 71 for more information. 2 Use the [RECORD READY] buttons to select tracks for recording. The corresponding READY indicators flash. 3 Press the [AUTO PUNCH] button. The AUTO PUNCH indicator flashes and the following display appears. AUTO Punc h RE C take 1 4 Press the [REC] and [PLAY] buttons simultaneously. The PLAY button indicator lights up and the REC indicator flashes. The Pre-roll point is located, and then playback starts. The Pre-roll time is set using the Pre Roll function. See "Setting the Pre-roll Time" on page 76 for more information. 5 Record punch in is performed automatically at the LAST REC IN point. The READY and REC button indicators light up continuously. 6 Record punch out is performed automatically at the LAST REC OUT point. The REC button indicator goes out and the READY indicators flash Playback continues up to the Post-roll point at which playback stops, the PLAY button indicator goes out, the Pre-roll point is located, and the D24 waits. The display shows "AUTO PUNCH-REC TAKE 2". D24-Owner's Manual