Yamaha D24 Owner's Manual - Page 39
Setting the Recording Resolution
View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
32 Chapter 4-Recording Setting the Recording Resolution The recording resolution can be set to one of three bit rates: 16, 20, or 24. Once something has been recorded in a project, the recording resolution cannot be changed, so it's important that you set the correct resolution when creating a new project. 1 Press the [SETUP] button. The SETUP indicator lights up. 2 Use the JOG/DATA dial to select "REC BIT," and then press the [ENTER] button. The currently selected recording resolution appears on the display. 3 Use the JOG/DATA dial to select a recording resolution. The recording resolution can be set to 16, 20, or 24. The default setting is 24. 4 Press the [ENTER] button to activate your selection, or the [CANCEL] button to cancel the Rec Bit function. The selected resolution appears in the BIT window on the display, as shown here. 5 Press the [SETUP] button again to leave setup. The SETUP indicator goes out. BIT 16 BIT 20 BIT 24 The following table lists the theoretical dynamic range available with each resolution. Recording Resolution 16 20 24 Theoretical Dynamic Range 96 dB 120 dB 144 dB Higher recording resolutions offer improved sonic performance by increasing the dynamic range, but require more disk space. A 640 MB Overwrite-type MO disk, for example, can store approximately 120 track minutes of 16-bit, 44.1 kHz digital audio, compared with 80 track minutes of 24-bit, 44.1 kHz digital audio. The recording resolution you choose will ultimately depend on your application and recording system. There's no point selecting a 20- or 24-bit recording resolution on the D24 if your digital mixing console's A/D converters are only 16-bit. If you intend to deliver your project to a third party, another studio, for example, consult them and agree on a recording resolution before you start recording on the D24. In general, 16-bit is the standard for music CDs and MiniDiscs, while 20- and 24-bit are used for professional recording and mastering applications, although you don't have to select the same resolution as that of the final distribution media. In fact, recording, mixing, and mastering at a higher resolution will most likely yield a better result. In a 16-bit system, for example, it's necessary to keep recording levels high to make best use of the 96 dB dynamic range and maximize signal-to-noise performance, which restricts headroom and constrains level setting. In a 24-bit system, levels can be set lower due to the larger 144 dB dynamic range, providing additional headroom, while maintaining signal-to-noise performance. Low-resolution digital audio signals can easily be transferred to higher-resolution systems, however, the reverse is not true. A 20-bit digital signal recorded on a 16-bit recorder without digital dither will be truncated, resulting in distortion. See "Digital I/O & Wordlength" on page 189 for more information. D24-Owner's Manual