Yamaha D24 Owner's Manual - Page 53
A–B Repeat Playback, Playback cycles between the A and B points.
View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
A-B Repeat Playback 47 A-B Repeat Playback A-B Repeat playback can be used to repeatedly play a specific part of a project, with playback cycling between the specified A and B points, as shown below. A point B point Repeat playback To use the A-B Repeat function, you must first set the A and B points, which can be set while the D24 is stopped or during rewind, fast forward, playback, recording, or rehearsal, but cannot be changed during A-B repeat playback. 1 While holding down the [SET] button, press the [A] button to set the A point, and then the [B] button to set the B point. A point B point SET A SET B When a point is set, the corresponding indicator (A or B) lights up and the stored position appears on the 2nd line of the display. See "Using the A & B Points" on page 61 for more information about setting the A and B points. 2 Press the [REPEAT] button. The REPEAT indicator lights up. 3 Press the [PLAY] button to start repeat playback. Playback cycles between the A and B points. Repeat playback can also be started by pressing the [REPEAT] button during playback. If the [REPEAT] button is pressed during repeat playback, the D24 cancels repeat playback and continues with normal playback. 4 Press the [STOP] button to stop playback. 5 Press the [REPEAT] button to cancel A-B Repeat. The REPEAT indicator goes out. A-B Repeat playback plays from the lowest point to the highest, so if the B point occurs before the A point, playback cycles from B to A. The A and B points for each project are saved to disk automatically. D24-Owner's Manual