Yamaha D24 Owner's Manual - Page 177

MIDI & the D24, MIDI Ports, Using MMC (MIDI Machine Control), Turning On MMC Reception

Get Yamaha D24 PDF manuals and user guides View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 177 highlights

178 Chapter 16-MIDI MIDI & the D24 The D24 supports the following MIDI messages: • MMC (MIDI Machine Control) for remote control with, for example, a MIDI sequencer-See "Using MMC (MIDI Machine Control)" on page 178. • MTC (MIDI Timecode) for synchronization with MTC-compatible equipment-See "Timecode & the D24" on page 134. MIDI Ports The MIDI ports are used to connect the D24 to other MIDI equipment for use with MTC and MMC. MIDI THRU OUT IN The MIDI IN port receives MIDI messages, the MIDI OUT port transmits them, and the MIDI THRU port retransmits all MIDI messages received by the MIDI IN port. Using MMC (MIDI Machine Control) MMC allows you to control the D24 remotely using a MIDI sequencer or other device that can transmit MMC commands, so when, for example, you start playback on your MIDI sequencer, the D24 starts playing as well. Since the D24 does not support MMC when it's configured as an MTC or SMPTE/EBU timecode slave, it must be the timecode master (see "Timecode & the D24" on page 134). Among the D24 functions that can be controlled via MMC are Stop, Play, Fast Forward, Rewind, and Record. See the table page 179 for a list of supported commands. The D24 does not transmit MMC commands. Turning On MMC Reception MMC command reception can be turned on or off using the MMC Receive function. 1 Press the [UTILITY] button. The UTILITY indicator lights up. 2 Use the JOG/DATA dial to select "MMC RECEIVE," and then press the [ENTER] button. The current MMC Receive setting appears on the display. 3 Use the JOG/DATA dial to select either "OFF" or "ON." The default setting is OFF. 4 Press the [ENTER] button to activate your selection, or the [CANCEL] button to cancel the MMC Receive function. 5 Press the [UTILITY] button again to leave utility. The UTILITY indicator goes out. D24-Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
178
Chapter 16
—
MIDI
D24—Owner’s Manual
MIDI & the D24
The D24 supports the following MIDI messages:
•
MMC (MIDI Machine Control) for remote control with, for example, a MIDI
sequencer—See “Using MMC (MIDI Machine Control)” on page 178.
•
MTC (MIDI Timecode) for synchronization with MTC-compatible equipment—See
“Timecode & the D24” on page 134.
MIDI Ports
The MIDI ports are used to connect the D24 to other MIDI equipment for use with
MTC and MMC.
The MIDI IN port receives MIDI messages, the MIDI OUT port transmits them, and
the MIDI THRU port retransmits all MIDI messages received by the MIDI IN port.
Using MMC (MIDI Machine Control)
MMC allows you to control the D24 remotely using a MIDI sequencer or other device
that can transmit MMC commands, so when, for example, you start playback on your
MIDI sequencer, the D24 starts playing as well. Since the D24 does not support MMC
when it’s configured as an MTC or SMPTE/EBU timecode slave, it must be the time-
code master (see “Timecode & the D24” on page 134). Among the D24 functions that
can be controlled via MMC are Stop, Play, Fast Forward, Rewind, and Record. See the
table page 179 for a list of supported commands. The D24 does not transmit MMC
commands.
Turning On MMC Reception
MMC command reception can be turned on or off using the MMC Receive function.
1
Press the [UTILITY] button.
The UTILITY indicator lights up.
2
Use the JOG/DATA dial to select
“
MMC RECEIVE,
”
and then press the [ENTER]
button.
The current MMC Receive setting appears on the display.
3
Use the JOG/DATA dial to select either
“
OFF
”
or
“
ON.
”
The default setting is OFF.
4
Press the [ENTER] button to activate your selection, or the [CANCEL] button
to cancel the MMC Receive function.
5
Press the [UTILITY] button again to leave utility.
The UTILITY indicator goes out.
THRU
OUT
IN
MIDI