Yamaha D24 Owner's Manual - Page 66
Using the A & B Points
View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Using the A & B Points 61 Using the A & B Points The A and B points can be used for quick locate or A-B Repeat playback. See page 47 for more information on A-B repeat playback. Setting the A & B Points The A and B points can be set while the D24 is stopped or during rewind, fast forward, playback, recording, or rehearsal. 1 While holding down the [SET] button, press the [A] button to set the A point, or the [B] button to set the B point. A point B point SET A SET B When a point is set, the corresponding indicator (A or B) lights up and the stored position appears on the 2nd line of the display. A and B points are set with sub-frame accuracy. To set the A or B point to a specific position, first locate that position, see "Locating Positions Directly" on page 63, and then store as explained above. To set the A or B point to one of the 99 locate memories, first recall the locate memory, see "Recalling Locate Points" on page 66, and then store as explained above. The A and B points for each project are saved to disk automatically. Locating the A & B Points 1 Press the [A] or [B] button to locate the A or B point respectively. A point Current position B point A B When the [A] or [B] button is pressed during playback, the stored point is located, and then playback continues. D24-Owner's Manual