Yamaha D24 Owner's Manual - Page 63

58 Chapter 6-Quick Locate Searching for Projects Projects can be selected using the PROJECT SEARCH buttons. 1 Press the [ ] PROJECT SEARCH button to locate the top of the current project. Press the button again to locate the top of the previous project. Current position 01 PROJECT 02 PROJECT 03 PROJECT 04 PROJECT 2 Press the [ ] PROJECT SEARCH button to locate the top of the next project. Current position 01 PROJECT 02 PROJECT 03 PROJECT 04 PROJECT If the [ ] PROJECT SEARCH button is pressed while the last recorded project is selected, "nn NEW PROJ" appears on the display. See "Recording" on page 33 for more information. Project Search Confirmation The Project Search Confirmation function is used to prevent accidental project selection with the PROJECT SEARCH buttons. When set to ON, the message "ARE YOU SURE" appears when a different project is selected by using the PROJECT SEARCH buttons, and you must press the [ENTER] button to confirm your selection. Project search confirmation is turned on or off using the P SERCH CNFM function. 1 Press the [UTILITY] button. The UTILITY indicator lights up. 2 Use the JOG/DATA dial to select "P SERCH CNFM," and then press the [ENTER] button. The current setting appears on the display. 3 Use the JOG/DATA dial to select either "OFF" or "ON." The default setting is OFF. 4 Press the [ENTER] button to activate your selection, or the [CANCEL] button to cancel the P SERCH CNFM function. 5 Press the [UTILITY] button again to leave utility. The UTILITY indicator goes out. D24-Owner's Manual