Yamaha D24 Owner's Manual - Page 88
Modifying a Project’s Start Time
View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Modifying a Project's Start Time 83 Modifying a Project's Start Time The TC Modify function is used to modify a project's start time, which is initially set when a project is first recorded. See "Recording" on page 33 for more information. 1 Select the project whose start time you want to modify. 2 Press the [EDIT] button. The EDIT indicator lights up. 3 Use the JOG/DATA dial to select "PROJECT EDIT," and then press the [ENTER] button. 4 Use the JOG/DATA dial to select "TC MODIFY," and then press the [ENTER] button. "PROJ TC MOD-00:00:00.00.0" appears on the display. 5 Use the JOG/DATA dial or keypad to enter a new start time. The default setting is 00:00:00.00.0. The current position can be captured by pressing the [CAPTURE] button and adjusted in sub-frame steps using the JOG/DATA dial. 6 Press the [ENTER] button. "PROJ TC MOD-ARE YOU SURE" appears on the display. 7 Press the [ENTER] button to fix the entered start time. 8 Press the [ENTER] button to modify the start time of the selected project, or the [CANCEL] button to cancel. The start time of the selected project is modified. When the timecode modify operation is complete, "FINISHED" appears on the display. 9 Press the [EDIT] button to leave edit. The EDIT indicator goes out. In the following example, the project's start time is modified from 00:00:00.00 to 00:10:00.00. 00:00:00.00 01 PROJECT 00:05:00.00 00:10:00.00 Timecode modified to 00:10:00.00 01 PROJECT 00:15:00.00 D24-Owner's Manual