Yamaha PSR-S950 Reference Manual - Page 107
MIDI Transmit Settings, UPPER, LOWER, NOTE Note events, CC Control Change, PC Program Change
View all Yamaha PSR-S950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
MIDI Transmit Settings The explanations here apply to the TRANSMIT page in step 4 on page 104. This determines which parts will be sent as MIDI data and over which MIDI channel the data will be sent. 1 The dots corresponding to each channel (1-16) flash briefly whenever any data is transmitted on the channel(s). 12 3 1 Use the [A]/[B] buttons or [1 ]/[2 ] buttons to select the part for changing transmit settings. The Parts listed on this display are the same as those shown in the MIXING CONSOLE display and CHANNEL ON/OFF display with the exception of the two parts below. UPPER A keyboard part played on the right side of the keyboard from the Split Point for the Voices (RIGHT 1 and/or 2). LOWER A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This is not affected by the on/off status of the [ACMP] button. 2 Use the [3 ] buttons to select a channel via which the selected part will be transmitted. NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel-resulting in unexpected sounds and possible glitches in the connected MIDI device. NOTE Protected Songs cannot be transmitted even if the proper Song channels 1-16 are set to be transmitted. 3 Use the [4 ]-[8 ] button to determine the types of data to be sent. The following MIDI messages can be set on the TRANSMIT/RECEIVE display. NOTE (Note events page 66 CC (Control Change page 66 PC (Program Change page 66 PB (Pitch Bend page 66 AT (Aftertouch page 66 Connections 10 PSR-S950/S750 Reference Manual 107