Yamaha PSR-S950 Reference Manual - Page 63
DELETE, CHANNEL TRANSPOSE, from Source 1 to the destination channel.
View all Yamaha PSR-S950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
2 DELETE You can delete the data of the specified channel in the Song. Select the channel whose data to be deleted by using the [1 ]-[8 ] buttons, then press the [D] (EXECUTE) button to execute the operation. 3 MIX This function lets you mix the data of two channels and place the results in a different channel. It also lets you copy the data from one channel to another. [2 ]/ [3 ] [4 ]/ [5 ] SOURCE 1 SOURCE 2 [6 ]/ DESTINATION [7 ] Determines the MIDI channel (1-16) to be mixed. All MIDI events of the channel specified here are copied to the destination channel. Determines the MIDI channel (1-16) to be mixed. Only note events of the channel specified here are copied to the destination channel. Besides the values 1-16, there is a "COPY" setting that allows you to copy the data from Source 1 to the destination channel. Determines the channel into which the mix or copy results will be placed. 4 CHANNEL TRANSPOSE This allows you to transpose the recorded data of individual channels up or down by a maximum of two octaves in semitone increments. 3 NOTE Make sure not to transpose channels 9 and 10. In general, Drum Kits are assigned to these channels. If you transpose the channels of Drum Kits, the instruments assigned to each key will be changed. Songs [F] CH 1-8/CH 9-16 Toggles between the two channel displays: Channels 1-8, and Channels 9-16. [G] ALL CH To simultaneously set all channels to the same value, adjust the Channel Transpose for one of the channels while holding down this button. PSR-S950/S750 Reference Manual 63