Yamaha PocketrakCX Reference Manual - Page 21
Setting the recording peak limiter, Setting the High Pass Filter (HPF), Setting Stereo Wide recording
UPC - 086792893440
View all Yamaha PocketrakCX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Recording Settings Setting the recording peak limiter When the recording peak limiter is set to ON, the recorder reduces sound distortion by automatically adjusting excessive peaks. It is recommended that you set the limiter to ON when you are recording audio. The peak limiter is available only when the ALC is set to OFF. Procedure: Press the [MENU/ENTER] button for at least two (2) seconds while the main screen is displayed, select [REC MENU] → [REC LIMITER] → [ON], then press the [MENU/ENTER] button. To cancel the recording peak limiter, select [OFF]. Setting the High Pass Filter (HPF) You can cut the low frequency range by switching the High Pass Filter on. The filter reduces the level of chatting voices, wind and other noise in the recording environment and enables you to record clearer audio. Procedure: Press the [MENU/ENTER] button for at least two (2) seconds while the main screen is displayed, select [REC MENU] → [HPF (High Pass Filter)] → [ON], then press the [MENU/ENTER] button. To cancel the High Pass Filter, select [OFF]. Setting Stereo Wide recording Recording with the STEREO WIDE option set to ON will enhance and widen the stereo image of the recorded sound. Procedure: Press the [MENU/ENTER] button for at least two (2) seconds while the main screen is displayed, select [REC MENU] → [STEREO WIDE] → [ON], then press the [MENU/ENTER] button. To cancel the stereo wide setting, select [OFF]. POCKETRAK CX Reference Manual 21