Yamaha PocketrakCX Reference Manual - Page 76
A network drive has been assigned., the drive letter an alphabet letter
UPC - 086792893440
View all Yamaha PocketrakCX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Appendix A file cannot be divided. Possible cause The microSD card may have insufficient free space. Corrective action Erase unnecessary files (see page 45). Possible cause Corrective action The file is too short to divide. The minimum file length required for the file division operation varies with the recording mode (see page 38). A file cannot be erased. Possible cause The attribute of the file is set to "read only." Corrective action Connect the unit to a computer and change the file attribute or erase the file using the computer. Alternatively, format the microSD card (see page 46). The Removable Disk icon does not appear when you connect the unit to the computer. Possible cause The unit is not connected to the computer correctly. Corrective action Make sure that the USB cable is securely and correctly connected to the unit and to the computer (see page 54). Possible cause Corrective action Power supplied from the computer to the unit is insufficient. If the recorder is connected via a bus-powered USB hub, remove the hub, then use the included USB cable to connect the recorder directly to the computer's USB terminal. Alternatively, use a self-powered USB hub (with the power adapter). If the computer features multiple USB terminals, use a different USB terminal to connect the recorder (see page 54). Possible cause Corrective action A network drive has been assigned. If a network drive has been assigned, the drive letter (an alphabet letter used as the drive name) is already taken. In this case, the Removable Disk icon may not be created. Change the network drive assignment, then reconnect the unit. Consult your network administrator regarding how to reassign the network drive. Possible cause Corrective action The connected computer does not recognize the recorder. If the computer does not recognize the unit, try connecting it again. If you connect the unit to any computer other than those supported by the unit, Yamaha will not guarantee the operation of the unit (see page 54). The file transfer speed (from the computer to the unit) is slow. Possible cause The unit is connected to a USB1.1 terminal on the computer. Corrective action Connect the unit to a USB2.0 High Speed terminal. POCKETRAK CX Reference Manual 76