Home » ZyXEL Manuals » Networking » ZyXEL NWA1123-NI » Manual Viewer

ZyXEL NWA1123-NI User Guide - Page 114

Table 33, LABEL, DESCRIPTION, Log Settings, NWA1120 Series User's Guide

Get ZyXEL NWA1123-NI PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 114 highlights

Chapter 10 Log Settings Table 33 Log Settings (continued) LABEL SMTP Authentication DESCRIPTION SMTP (Simple Mail Transfer Protocol) is the message-exchange standard for the Internet. Select the check box to activate SMTP authentication. If mail server authentication is needed but this feature is disabled, you will not receive the e-mail logs. User Name Password Syslog Logging Syslog Logging Syslog Server IP Address Syslog Port Number Send Log Log Schedule If you use SMTP authentication, the mail receiver should be the owner of the SMTP account. If your e-mail account requires SMTP authentication, enter the username here. Enter the password associated with the above username. Syslog logging sends a log to an external syslog server used to store logs. Select the check box to enable syslog logging. Enter the IP address of the syslog server that will log the selected categories of logs. Enter the port number of the syslog server that will log the selected categories of logs. This drop-down menu is used to configure the frequency of log messages being sent as E-mail: Day for Sending Log Time for Sending Log Clear log after sending mail Log Category System Maintenance System Error 802.1x Wireless Email Log Now Apply Cancel • When Log is Full • Hourly • Daily • Weekly • None. If the Weekly or the Daily option is selected, specify a time of day when the E-mail should be sent. If the Weekly option is selected, then also specify which day of the week the E-mail should be sent. If the When Log is Full option is selected, an alert is sent when the log fills up. If you select None, no log messages are sent. This field is only available when you select Weekly in the Log Schedule field. Use the drop down list box to select which day of the week to send the logs. Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to send the logs. Select the check box to clear all logs after logs and alert messages are sent via email. Click this to receive logs related to system maintenance. Click this to receive logs related to system errors. Click this to receive logs related to the 802.1x mode. Click this to receive logs related to the wireless function. Select the categories of alerts for which you want the NWA to immediately send email alerts. Click Apply to save your customized settings. Click Cancel to begin configuring this screen afresh. 114 NWA1120 Series User's Guide

Section	Page
NWA1120 Series	1
Contents Overview	3
Table of Contents	5
User’s Guide	9
Introducing the NWA	11
1.1 Introducing the NWA	11
1.1.1 Dual-Band	12
1.2 Wireless Modes	12
1.2.1 MBSSID	12
1.2.2 Wireless Client	13
1.2.3 Root AP	15
1.2.4 Repeater	15
1.3 Ways to Manage the NWA	16
1.4 Configuring Your NWA’s Security Features	17
1.4.1 Control Access to Your Device	17
1.4.2 Wireless Security	17
1.5 Good Habits for Managing the NWA	17
1.6 Hardware Connections	18
1.7 LED	18
Introducing the Web Configurator	19
2.1 Accessing the Web Configurator	19
2.2 Resetting the NWA	20
2.2.1 Methods of Restoring Factory-Defaults	21
2.3 Navigating the Web Configurator	22
2.3.1 Title Bar	22
2.3.2 Navigation Panel	23
2.3.3 Main Window	24
Dashboard	25
3.1 The Dashboard Screen	25
Tutorial	29
4.1 How to Configure the Wireless LAN	29
4.1.1 Choosing the Wireless Mode	29
4.1.2 Further Reading	29
4.2 How to Configure Multiple Wireless Networks	29
4.2.1 Configure the SSID Profiles	31
4.2.2 Configure the Standard Network	33
4.2.3 Configure the VoIP Network	34
4.2.4 Configure the Guest Network	36
4.2.5 Testing the Wireless Networks	38
4.3 NWA Setup in AP and Wireless Client Modes	38
4.3.1 Scenario	38
4.3.2 Configuring the NWA in MBSSID or Root AP Mode	39
4.3.3 Configuring the NWA in Wireless Client Mode	42
4.3.4 MAC Filter Setup	44
4.3.5 Testing the Connection and Troubleshooting	45
Technical Reference	47
Monitor	49
5.1 Overview	49
5.2 What You Can Do	49
5.3 View Logs	49
5.4 Statistics	50
5.5 Association List	51
5.6 Channel Usage	52
Wireless LAN	55
6.1 Overview	55
6.2 What You Can Do in this Chapter	55
6.3 What You Need To Know	56
6.4 Wireless Settings Screen	60
6.4.1 Root AP Mode	61
6.4.2 Repeater Mode	65
6.4.3 Wireless Client Mode	68
6.4.4 MBSSID Mode	71
6.5 SSID Screen	74
6.5.1 Configuring SSID	75
6.6 Wireless Security Screen	76
6.6.1 Security: WEP	78
6.6.2 Security: WPA, WPA2, WPA2-MIX	79
6.6.3 Security: WPA-PSK, WPA2-PSK, WPA2-PSK-MIX	81
6.7 RADIUS Screen	82
6.8 Layer-2 Isolation	84
6.8.1 Layer-2 Isolation Screen	85
6.9 MAC Filter Screen	86
6.10 Technical Reference	88
6.10.1 Additional Wireless Terms	89
6.10.2 WMM QoS	89
6.10.3 Security Mode Guideline	90
LAN	91
7.1 Overview	91
7.2 What You Can Do in this Chapter	91
7.3 What You Need to Know	91
7.4 LAN IP Screen	93
VLAN	95
8.1 Overview	95
8.1.1 What You Can Do in This Chapter	95
8.2 What You Need to Know	95
8.3 VLAN Screen	96
System	97
9.1 Overview	97
9.2 What You Can Do in this Chapter	97
9.3 What You Need To Know	98
9.4 WWW Screen	100
9.5 Certificates Screen	101
9.6 Telnet Screen	102
9.7 SNMP Screen	104
9.8 FTP Screen	106
9.9 Technical Reference	107
9.9.1 MIB	107
9.9.2 Supported MIBs	108
9.9.3 Private-Public Certificates	108
9.9.4 Certification Authorities	108
9.9.5 Checking the Fingerprint of a Certificate on Your Computer	109
Log Settings	111
10.1 Overview	111
10.2 What You Can Do in this Chapter	111
10.3 What You Need To Know	112
10.4 Log Settings Screen	112
Maintenance	115
11.1 Overview	115
11.2 What You Can Do in this Chapter	115
11.3 What You Need To Know	116
11.4 General Screen	116
11.5 Password Screen	117
11.6 Time Screen	118
11.7 Firmware Upgrade Screen	119
11.8 Configuration File Screen	120
11.8.1 Backup Configuration	120
11.8.2 Restore Configuration	120
11.8.3 Back to Factory Defaults	121
11.9 Restart Screen	121
Troubleshooting	123
12.1 Power, Hardware Connections, and LEDs	123
12.2 NWA Access and Login	124
12.3 Internet Access	125
12.4 Wireless LAN	126
Setting Up Your Computer’s IP Address	129
Pop-up Windows, JavaScript and Java Permissions	157
IP Addresses and Subnetting	169
IPv6	177
Wireless LANs	187
Legal Information	201

Match case Limit results 1 per page

Chapter 10 Log Settings

NWA1120 Series User’s Guide

114

SMTP Authentication

SMTP (Simple Mail Transfer Protocol) is the message-exchange standard for the

Internet. Select the check box to activate SMTP authentication. If mail server

authentication is needed but this feature is disabled, you will not receive the e-mail

logs.

If you use SMTP authentication, the mail receiver should be the owner of the SMTP

account.

User Name

If your e-mail account requires SMTP authentication, enter the username here.

Password

Enter the password associated with the above username.

Syslog Logging

Syslog logging sends a log to an external syslog server used to store logs.

Syslog Logging

Select the check box to enable syslog logging.

Syslog Server IP

Address

Enter the IP address of the syslog server that will log the selected categories of logs.

Syslog Port

Number

Enter the port number of the syslog server that will log the selected categories of

logs.

Send Log

Log Schedule

This drop-down menu is used to configure the frequency of log messages being sent

as E-mail:

•

When Log is Full

•

Hourly

•

Daily

•

Weekly

•

None.

If the

Weekly

or the

Daily

option is selected, specify a time of day when the E-mail

should be sent. If the

Weekly

option is selected, then also specify which day of the

week the E-mail should be sent. If the

When Log is Full

option is selected, an alert

is sent when the log fills up. If you select

None

, no log messages are sent.

Day for Sending

Log

This field is only available when you select

Weekly

in the

Log Schedule

field.

Use the drop down list box to select which day of the week to send the logs.

Time for Sending

Log

Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to

send the logs.

Clear log after

sending mail

Select the check box to clear all logs after logs and alert messages are sent via e-

mail.

Log Category

System

Maintenance

Click this to receive logs related to system maintenance.

System Error

Click this to receive logs related to system errors.

802.1x

Click this to receive logs related to the 802.1x mode.

Wireless

Click this to receive logs related to the wireless function.

Email Log Now

Select the categories of alerts for which you want the NWA to immediately send e-

mail alerts.

Apply

Click

Apply

to save your customized settings.

Cancel

Click

Cancel

to begin configuring this screen afresh.

Table 33

Log Settings (continued)

LABEL

DESCRIPTION