ZyXEL NWA1123-NI User Guide - Page 121
Back to Factory Defaults, 11.9 Restart Screen
View all ZyXEL NWA1123-NI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 11 Maintenance The NWA automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Figure 66 Network Temporarily Disconnected If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default NWA IP address (192.168.1.2). See Appendix A on page 129 for details on how to set up your computer's IP address. 11.8.3 Back to Factory Defaults Pressing the Reset button in this section clears all user-entered configuration information and returns the NWA to its factory defaults as shown on the screen. The following screen will appear. Figure 67 Reset Message You can also press the RESET button to reset your NWA to its factory default settings. Refer to Section 2.2 on page 20 for more information. 11.9 Restart Screen Use this screen to reboot the NWA without turning the power off. Click Maintenance > Restart. The following screen displays. Figure 68 Maintenance > Restart Click Restart to have the NWA reboot. This does not affect the NWA's configuration. NWA1120 Series User's Guide 121