ZyXEL U-336R User Guide - Page 120

Command Function & Description +Ref. register also sets the time-out interval for the "W" dial modifier to wait for the dial tone. (See also S41b4) S7= Set duration, in number of seconds modem +060 waits for a carrier S8= Set duration, in seconds, for pause (,) option in +002 Dial command and pause between command re-executions for Repeat (>) command S9= Set duration, in tenths of a second of remote +006 carrier signal before recognition (Ignored if in non-FSK or half-duplex operation) S10= Set duration, in tenths of a second, modem +007 waits after loss of carrier before hanging up S11= Set duration and spacing, in milliseconds, of +070 dialed Touch-Tones Extended S-Registers "ATSn=x" Command bit dec hex Function and description S13= bit dec hex Bit-mapped register 1 2 2 Capture modem manufacturer information during V.42 handshake, can be displayed at ATI2 line if available ('Flash' or ' ZyXEL' stands for ZyXEL connection) S14= bit dec hex Bit-mapped register: 0 0 0 Modem auto-handshake on Originate mode 1 1 Modem auto-handshake on Answer mode Ref. +000 +002 *M0 *M1 106 Status Registers & Result Codes