ZyXEL U-336R User Guide - Page 81
Class 1 Command Set
View all ZyXEL U-336R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
O NOTE: Several revisions of the class 2 standard exist. Implementations conforming to different revisions may not work together. A formally approved version is the Class 2.0 command set, also called the TIA592 standard. Class 1 Command Set Command Value Description +FCLASS=n Service class selection n=0 Set to Data mode n=1 Set to Class 1 mode n=2 Set to Class 2 mode n=2.0 Set to Class 2.0 mode n=6 Set to ZFAX mode n=8 Set to Voice mode IF S57.4=0 (DEFAULT), THE RESPONSE TO THE +FCLASS=? COMMAND WILL NOT REPORT CLASS 1 CAPABILITY. THIS IS DUE TO THE FACT THAT SOME FAX SOFTWARE PACKAGES MAY GET CONFUSED BY THIS RESPONSE. Command +FTS=n +FRS=n +FTM= +FRM= +FTH= +FRH= Value 0-255 0-255 Description Stop transmission and pause, in 10 ms units. Wait for silence, in 10 ms units. Transmit data with carrier. Receive data with carrier. Transmit HDLC data with carrier. Receive HDLC data with carrier. The parameter for the preceding commands take the following values: Fax Operation 67