ZyXEL U-336R User Guide - Page 32
Command, Description, AT Command Set/Type, Example
View all ZyXEL U-336R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
There are a few basic commands that do not require the "AT" command prefix. These are as follows: Command A/ A> +++ Description Repeats the last issued AT command once. Repeats the last issued AT command once, or redials the last dialed number up to 9 times until a key is pressed or a connection is made. Terminates the current connection attempt, if pressed while modem is handshaking. Escape code sequence. Entered while the modem is in Data Mode. Returns modem to Command Mode. The U-336S/SA supports several groups of AT commands: AT Command Set/Type Basic AT (Hayes compatible) Basic AT$ (on line help) Extended AT& commands Extended AT* commands Fax AT+ commands S-Register command S-Register bit-mapped command (set SRegister bit 1 equal to 1) S-Register inquiry command Example ATB0 AT$ AT&N0 AT*I1 AT+FCLASS=2 ATS0=1 ATS13.1=1 ATS0? Or ATS13.1? You may browse the lists of available commands for each command set by using the on-line help commands: AT$, AT*$, AT&$, and ATS$. Further detail on AT commands will be covered in the chapters that pertain to their use. 18 Basic Modem Operation