ZyXEL U-336R User Guide - Page 96
Command, Function
View all ZyXEL U-336R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Mode Setting Command #F Function Set the modem into V17G3 FAX mode same function as the extended AT command AT&N32. #B0 Set fax receiving mode. The connection parameters and received fax data are sent to DTE continuously following the connect message. (Default) #B1 Set fax receiving mode. The messages are separated from the received fax data. The modem sends CONNECT FAX and ZyXEL first, then it waits for the DC2 character (hex18) to send the fax data. When the modem receives a DC2 from the DTE, it starts to send the fax connection parameters/SnnnnVnTnRnLnCnP then the received fax data. In this mode, the modem will wait for DC2 at the beginning of every page. The DTE software should detect the page separator RTC and then sends the DC2 to receive the next page of fax data. This mode is used with a BBS receiving faxes. #B2 This mode is for the polling feature of the modem. In this mode, the modem will send a polling signal to the remote fax device to ask to receive a fax from the remote fax device. The received fax data will be sent to the DTE continuously following the connection message. #B3 Displays the ring cadence. Parameter Setting Command Function #V0 Set to normal vertical resolution. #V1 Set to high vertical resolution. #T0 Set to one dimensional coding scheme. 82 Fax Operation