ZyXEL U-336R User Guide - Page 98
Field, Description
View all ZyXEL U-336R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Status Report Result Codes When the U-336S/SA is in fax mode, each ATD or ATA command will make the modem try to establish a fax connection. Your modem will send a status report result code back to the DTE (computer). NO DIAL TONE NO CARRIER BUSY NO ANSWER CONNECT FAX Tried to dial but no dial tone is detected. Handshake fails or no carrier is detected or timeout. Other party's phone line is busy. Quiet answer is not detected before time-out. See below. When a fax connection is successfully established, the modem returns this message: CONNECT FAX/SnnnnVnTnRnLnCnP This message includes the connection speed and the fax parameters explained in the table below. Field Snnnn Vn Tn Rn Ln Cn P Description Fax connection speed; nnnn is a 4-digit number representing the connection speed. nnnn =1440, 1200, 9600, 7200, etc., 1440 and 1200 stand for 14400 and 12000. Vertical resolution; n = 0 or 1. Coding scheme; n = 0 or 1. Recording width; n = 0, 1, or 2. Recording length; n = 0, 1, or 2. Scan line time; n = 0 to 7. Remote fax number. 84 Fax Operation