ZyXEL U-336R User Guide - Page 90
Phase C received EOL alignment
View all ZyXEL U-336R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Command +FDT +FEA=n +FIE=n +FIP +FIS=vr,br,wd,l n,df,ec,bf,st +FKS +FLI="string" +FLO=n +FLP=n Value n=0 n=1 n=0 n=1 n=0 n=1 n=2 n=0 n=1 Description document reception Transmit phase C data command: releases the DCE to proceed with negotiation Phase C received EOL alignment parameter Determine that T.4 EOL patterns are bit aligned (as received). Determine that the last received bits of T.4 EOL patterns are byte aligned by the DCE, with necessary zero fill bits inserted. Procedure interrupt parameter Procedure interrupt requests from the remote station are ignored, and not reported to the DTE. Procedure interrupt requests from the remote station are accepted, negotiated and reported using the +FVO response. Initialize facsimile parameters to factory default. Current session parameter. refer to +FDCC Class 2 command in previous section parameter settings. Session termination command. Local ID string parameter. Flow control options: No flow control. Set XON/XOFF software flow control. Set CTS/RTS hardware flow control. Document for polling command: The DTE has no document for polling. Indicated document available for polling. 76 Fax Operation