3M MP220 Operation Guide - Page 17
Power Button
View all 3M MP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3M™ Pocket Projector MP220 Power Button The power button turns on or shuts down the projector. When you turn on the projector, it is ready to use in 30 seconds. While the projector is on, you can turn the projector's lamp on or off using the power button. The projector's lamp turns on and off in only a second. You can turn on the projector's lamp by pressing any button on the projector. Turning the Projector On Press the power button. Note that the projector might take 30 seconds or more to power on. Turning the Projector Off 1 Press and hold the power button until the device options menu appears on the screen. 2 Select Power off from the menu. 3 Confirm that you wish to turn the projector off by selecting OK Turning the Lamp On and Off You can turn the projector's lamp off without turning the projector off. Press and quickly release the power button and the projector's lamp with turn off. The projector lamp will turn off immediately while the cooling fans continue to run for a few seconds. While the projector lamp is off, the status indicator will flash green. This tells you that the lamp is off but the projector is still on. Press any button on the projector and the lamp will turn on. Important Note: When the lamp is off, the projector continues to use power. Do not place projector in a bag in this state as it can easily be turned back on. © 2012 3M. All Rights Reserved. 17