3M MP220 Operation Guide - Page 50
Settings
View all 3M MP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3M™ Pocket Projector MP220 Blank Image You can blank the image while a video input is playing. Blanking the Image: Press Menu and then select Blank. A blue screen will appear. Resume the Image: Press Menu and then select Resume. Image Capture The Video/VGA Pass Through application can capture paused video and computer images. When an image is captured, the image is saved into the /DCIM/Camera folder on the projector's onboard memory. To capture an image: Press Menu and then select Capture. A message appears when the image capture is complete. Note: If you get a Save Failed message, the projector's memory is being scanned or the microSD card is not mounted. Settings These settings let you change how you view the video image coming from a video source. The projector displays a WSVGA image (or 1024x600 pixels) which is a 17:10 image. Signal Aspect Ratio Change the aspect ratio (width versus height) of the image. When you choose one of the aspect ratios, the image is stretched or shrunk to that aspect ratio. t Default - Aspect Ratio setting for the input resolution t 4:3 - Scales the image to a 4:3 aspect ratio t 16:9 - Scales the image to a 16:9 aspect ratio t Native - Aspect Ratio scales the image to the projector native Aspect ratio, 17:10 Letterbox Cropping Crops or cuts the image down to the specified aspect ratio. Edge Cropping 50 © 2012 3M. All Rights Reserved.