3M MP220 Operation Guide - Page 45
Transferring Files to the Projector
View all 3M MP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3M™ Pocket Projector MP220 Transferring Files to the Projector The MP220 has both built-in memory and a removable microSD™ card where you can place files. You can put files on the 3M MP220 projector using a USB connection, or you can transfer files to a microSD card prior to inserting it into the MP220. The following sections cover transferring files using a microSD card or a USB connection. Note: The projector cannot transfer files from the microSD card to the projector's internal memory. Using the microSD Card Slot The 3M MP220 projector has a microSD card slot that supports SDHC and can read up to a 32 GB card. You can either place files on the card before you insert it into the projector's card slot or while the projector is connected to a USB port on a computer. The projector must access (or mount) the file system on the SD Card after a microSD is inserted. TIP: Use a microSD card class 4 or higher for best performance. Inserting the microSD Card 1 Open the microSD slot door. 2 Insert the microSD card into the microSD slot until it "clicks" into place. 3 Close the microSD door. 4 If the projector is on, it will mount the SD card and scan the files. © 2012 3M. All Rights Reserved. 45