3M MP220 Operation Guide - Page 47
Using the USB Port, Transfer Files Using USB
View all 3M MP220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3M™ Pocket Projector MP220 Using the USB Port The MP220 has a USB connection located at the rear of the projector. You can connect the MP220 projector to a computer and the computer can open both the MP220 internal memory and microSD card like a disk drive. Types of devices that may transfer data to the projector: t Computers t Netbooks t Tablets Troubleshooting: If your computer is running Microsoft Windows, the USB Flash drive may not be available on your computer's Windows Explorer. Please refer to KB297694 on the Microsoft support website. Transfer Files Using USB 1 Turn on the projector. 2 Connect the USB cable to the projector. 3 Connect the USB cable to the computer. The projector screen will display the USB Mass Storage screen 4 Select the Turn on USB Storage button and the USB Android icon will turn red. 5 Select OK when the Turn on USB storage dialog appears. The projector will be detected as a removable drive labeled "Internal" by the computer. The drive labeled "Internal" is the projector's on-board memory, and "Removable Disk" is the microSD card installed into the projector. Note that the first time you connect your projector to a computer, it may take the computer some time to detect and install drivers for reading the memory on the projector. 6 The projector is now ready to receive a file from your computer. © 2012 3M. All Rights Reserved. 47