Acer G330 User Manual - Page 45

Opening the server, Removing the side panel

Get Acer G330 - Altos - 1 GB RAM PDF manuals and user guides
UPC - 750519177044
View all Acer G330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

27 Opening the server Caution: Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Read the "Pre-installation instructions" section page 26. You need to open the server before you can install upgrade components. The front bezels and (left) side panel are removable to allow access to the server's internal components. Refer to the following sections for instructions. Removing the side panel 1 Perform the pre-installation instructions described on page 26. 2 Open the HDD bay bezel. (1) If necessary, insert the key into the lock and turn it counterclockwise until it points to the unlock icon. (2) Open the lower bezel to a 90° angle. 3 Remove the side panel. (1) Loosen the two screws located on the rear edge of the side panel. (2) Move the side panel release latch all the way down to unfasten the panel from the chassis.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
27
Opening the server
Caution:
Before you proceed, make sure that you have turned
off the system and all peripherals connected to it.
Read the
"
Pre-installation instructions
"
section page 26.
You need to open the server before you can install upgrade
components.
The front bezels and (left) side panel are removable to
allow access to the server’s internal components.
Refer to the
following sections for instructions.
Removing the side panel
1
Perform the pre-installation instructions described on page 26.
2
Open the HDD bay bezel.
(1)
If necessary, insert the key into the lock and turn it
counterclockwise until it points to the unlock icon.
(2)
Open the lower bezel to a 90° angle.
3
Remove the side panel.
(1)
Loosen the two screws located on the rear edge of the
side panel.
(2)
Move the side panel release latch all the way down to
unfasten the panel from the chassis.