Alcatel OS6855-24 User Guide - Page 100

PoE Configurations OS6855-P14, Redundant Chassis Power with PoE OS6855-P14 - fitness

Get Alcatel OS6855-24 PDF manuals and user guides View all Alcatel OS6855-24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 100 highlights

Rack-Mounting OS6855-14/P14 and OS6855-U10 Switches Mounting OS6855-14/P14 and OS6855-U10 Switches Plug the longer connector cable from the second PoE power supply into the PoE2 port on the rear panel of the chassis, then connect the shorter cable to the female AC connector on the remaining system power supply. When complete, continue to step 5. PoE Configurations (OS6855-P14) OS6855-P14 switches using PoE require a second power supply. This second power supply is a PoEspecific unit included with your Alcatel-Lucent product shipment and is installed into a separate power supply tray. Note. For OS6855-P14 switches the PoE power supply will be placed in a separate power supply tray. For this configuration, plug the connector cable from the system power supply into the PS1 port on the rear panel of the chassis. Refer to "PS-I185AC-P (SDR-240-55) Power Supply Mounting" on page 4-14 for mounting instructions. When complete, continue to step 6. Redundant Chassis Power with PoE (OS6855-P14) For OS6855-P14 switches using redundant chassis power in addition to PoE, a total of four power supplies are required. Note. For OS6855-P14 switches using redundant chassis power with PoE, place the system power supplies connected to the PS1 and PS2 ports side-by-side in the tray. The power supplies connected to ports PoE1 and PoE2 will each be placed in their own separate power supply tray. For this configuration, plug a second Alcatel-Lucent-provided system power supply into the PS2 port on the rear panel of the chassis. Refer to "PS-I185AC-P (SDR-240-55) Power Supply Mounting" on page 4-14 for mounting instructions. When complete, continue to step 6. 5 Next, connect the shorter PoE connector cable to the female AC connector on the system power supply installed at step 2. Place the power supply (or supplies) into the power supply tray with the connector cables facing forward. 6 Position the power supply retaining strap over the power supplies. Insert the retaining strap's tabs into the notches located on the left and right sides of each power supply in order to hold each power supply firmly in place. Be sure that the tabs are completely inserted in the power supply notches and that the end flanges of the retaining strap fit inside the walls of the power supply tray. page 4-8 OmniSwitch 6855 Series Hardware Users Guide September 2011

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
Rack-Mounting OS6855-14/P14 and OS6855-U10 Switches
Mounting OS6855-14/P14 and OS6855-U10 Switches
page 4-8
OmniSwitch 6855 Series Hardware Users Guide
September 2011
Plug the longer connector cable from the second PoE power supply into the PoE2 port on the rear panel of
the chassis, then connect the shorter cable to the female AC connector on the remaining system power
supply.
When complete, continue to step 5.
PoE Configurations (OS6855-P14)
OS6855-P14 switches using PoE require a second power supply. This second power supply is a PoE-
specific unit included with your Alcatel-Lucent product shipment and is installed into a separate power
supply tray.
Note.
For OS6855-P14 switches the PoE power supply will be placed in a separate power supply tray.
For this configuration, plug the connector cable from the system power supply into the PS1 port on the
rear panel of the chassis.
Refer to
“PS-I185AC-P (SDR-240-55) Power Supply Mounting” on page 4-14
for mounting instructions.
When complete, continue to step 6.
Redundant Chassis Power with PoE (OS6855-P14)
For OS6855-P14 switches using redundant chassis power
in addition to
PoE, a total of four power supplies
are required.
Note.
For OS6855-P14 switches using redundant chassis power with PoE, place the system power supplies
connected to the PS1 and PS2 ports side-by-side in the tray. The power supplies connected to ports PoE1
and PoE2 will each be placed in their own separate power supply tray.
For this configuration, plug a second Alcatel-Lucent-provided system power supply into the PS2 port on
the rear panel of the chassis.
Refer to
“PS-I185AC-P (SDR-240-55) Power Supply Mounting” on page 4-14
for mounting instructions.
When complete, continue to step 6.
5
Next, connect the shorter PoE connector cable to the female AC connector on the system power supply
installed at step 2. Place the power supply (or supplies) into the power supply tray with the connector
cables facing forward.
6
Position the power supply retaining strap over the power supplies. Insert the retaining strap’s tabs into
the notches located on the left and right sides of each power supply in order to hold each power supply
firmly in place. Be sure that the tabs are completely inserted in the power supply notches and that the end
flanges of the retaining strap fit
inside
the walls of the power supply tray.