Alcatel OS6855-24 User Guide - Page 83
Rack Mounting the Power Supply Tray, Attaching a Rack-Mount Flange
View all Alcatel OS6855-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Mounting OS6855-24 and OS6855-U24/U24X Installing Power Supplies 4 Carefully slide the power supply against the back of the chassis until the power connector securely connects. 5 Tighten the captive screw for each power supply located at back of the power supply to the power supply tray. Rack Mounting the Power Supply Tray The following section describes how to rack-mount a power supply tray and connect the power supply with a cable. 1 Align the threaded holes in the provided rack-mount flanges with the holes in the power supply tray. These holes are located on the left and right sides of the tray. 2 Attach the flanges to the tray using the provided Phillips-head screws. The screws slide through the non-threaded holes from the inside of the power supply tray and are then attached to the mounting brackets using the threaded holes. Be sure to tighten each of the screws firmly using a Phillips screwdriver. Attaching a Rack-Mount Flange OmniSwitch 6855 Series Hardware Users Guide September 2011 page 3-7