Alcatel OS6855-24 User Guide - Page 87
Hot-Swapping Power Supplies, Hot-Swapping a Power Supply Directly Connected to the Chas sis
View all Alcatel OS6855-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Mounting OS6855-24 and OS6855-U24/U24X Hot-Swapping Power Supplies Hot-Swapping Power Supplies OmniSwitch 6855 Series switches support hot-swapping of their power supplies. The following sections describe how to hot-swap a power supply either directly connected (i.e., without a cable) or rack-mounted power supply. Warning: Before proceeding, ensure a redundant power supply is connected and operational. Anti-Static Warning. Before handling any components, free yourself of static by wearing a grounding strap, or by grounding yourself properly. Static discharge can damage the switch and the backup power supply. Hot-Swapping a Power Supply Directly Connected to the Chassis 1 Disconnect the power supply to be hot-swapped from its power source. 2 Loosen the captive screw of the power supply to be hot-swapped. 3 Carefully slide the power supply out of the power supply tray and set aside. Directly Connected Power Supply 4 Carefully slide the new power supply onto the tray and against the back of the chassis until the power connector securely connects 5 Tighten the captive screw for the new power supply to the power supply tray. 6 Re-connect the power supply to its power source. OmniSwitch 6855 Series Hardware Users Guide September 2011 page 3-11