Asus P I-P55SP3AV P/I-P55SP3AV User's manual - Page 40

Software Guide The first eleven lines after "Auto Configuration", which should be set to "Enabled", are optimal settings for this mainboard that are defined by the Auto Configuration feature, which configures the settings based on the CPU clock speed. All the other settings up to "Allocate Memory Hole", with the exception of "Slow DRAM Refresh (1:4)" , are the recommended settings for this mainboard. You should not change them unless you know what you are doing. If you install SIMMs that use Slow Refresh DRAM, you should set "Slow DRAM Refresh (1:4)" to "Enabled ". There are two settings for "Onboard VGA Mem Size", "1MB" and "2MB". With 2MB of display memory, higher resolutions and with more colors can be displayed. See the documentation file for the SIS 6205 Super VGA for more information on this. The settings for "Onboard VGA Mem Frequency" are "Normal" "Fast" and "Fastest". You must have 60ns or EDO system DRAM to use the "Fastest" setting. The default setting is "Fast" You can enable "Allocate Memory Hole" if you need it for an expansion card that requires this feature. The documentation for the card should have instructions regarding the required Hole Start Address and Hole Size settings. When you are done with this section, press the key to go back to the main screen. The next section covers Power Management Setup. I 3-13