Bosch DVR-16L-100A Operation Manual - Page 107
System setup
View all Bosch DVR-16L-100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Digital Video Recorder Control Center | en 105 • Video loss: Sends an e-mail when a video signal from the camera has stopped because of a cable disconnection or malfunction of a camera. • Motion detect: Sends an e-mail when motion detection has occurred. • Power on/off: Sends an e-mail when power is on or off. • Disk full: Sends an e-mail when the HDD has fully recorded. • Admin PW changed: Sends an e-mail when the administrator password has changed. DDNS • User ID: Enter the DDNS registered user name. • Password: Enter the user password in [User ID]. Note: The DDNS function is serviced using a TCP 8245 port by "No-IP" (http:// www.no-ip.com/). In case the DVR is used in the network system with a firewall, open the TCP 8245 port so that DDNS data can get into firewall. For more detail on firewall setup, ask your network administrator and/or network service provider. Emergency • Notification: Notify the Alarm Notifier about unit operating information according to your notification settings. • IP Address, Port: Enter the IP Address and port number of the Alarm Notifier program installed on the PC. The factory default port for this function is 9002. However, in some cases it is better to change this port number for added flexibility or security. If desired, change the port number (1025 ~ 65535). You can set up to 9 IP address and port numbers. 6.7.5 System setup Figure 6.37 The System setup window Date/Time settings Set the date/time options. Bosch Security Systems User Manual F01U | 2.0 | 2008.12