Bosch DVR-16L-100A Operation Manual - Page 57
Network settings
View all Bosch DVR-16L-100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Digital Video Recorder 3.23 Network settings 3.23.1 TCP/IP Connections and settings | en 55 Figure 3.40 TCP/IP setup menu • DHCP: DHCP stands for Dynamic Host Configuration Protocol. - On: Network settings of this unit are configured automatically by the DHCP server. If you set to ON, the [IP Address], [Subnet Mask], [Gateway], [Primary DNS] and [Secondary DNS] options are dimmed and these options can not be set. - Off: Enter the network settings manually. • IP address: Enter an IP address using the virtual keyboard. • Subnet mask: Enter a subnet mask address using the virtual keyboard. • Gateway: Enter the gateway address using the virtual keyboard. • Primary DNS: Enter the Main DNS server address using the virtual keyboard. • Secondary DNS: Enter the Sub DNS server address using the virtual keyboard. • Remote client port no.: Enter the remote client port number using the virtual keyboard. You can watch the live surveillance image over the network with the Control Center program. The factory default port for transmission of video and audio data is 9001. However in some cases it is better to change this port number for added flexibility or security. If desired change the port number (1025 ~ 65535). • HTTP port no.: Enter the HTTP port number using the virtual keyboard. You can watch the live surveillance image over the network with a web browser. Typically the TCP port used by HTTP is 80. However in some cases it is better to change this port number for added flexibility or security. If desired change the port number (80 or 1025~ 65535). • Bandwidth limit: Enter the Bandwidth to adjust the data traffic. Note: When you change the Remote client port or HTTP port number, all connections with the Control Center programs or web browser will be disconnected. Bosch Security Systems User Manual F01U | 2.0 | 2008.12