Brother International BAS-416A Instruction Manual - English - Page 11
Introduction, Embroidery, Machine
View all Brother International BAS-416A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Explanation of models This manual explains two models: • BAS-416A (9 needles) • BES-1210AC (12 needles) Explanation for individual model is provided by identifying the model name. Check the model before using the machine. Chapter 1. An Introduction of Embroidery Machine 1. Machine features • This interactive machine is based on dialogue system and enables even a complete beginner to easily embroider multi-colored patterns. • By setting a program in advance, thread changing and thread trimming can be done automatically. Up to 99 colors can be put in a pattern and up to 27000 stitches can be stored in the memory as standard use. By running a 2DD floppy disk, up to 240000 stitches can be sewn in a pattern. • Up to 16 patterns can be entered in the memory. By entering a pattern in advance, it can be sewn anytime. By using the memory expansion board (optional), up to 280000 stitches can be put in the memory. • If the tape reader (optional) is connected, the tapes of Tajima, Barudan and Zangs format (1 inch/8 holes), and the floppy disk of Tajima, and the receive data from Brother's editing system can be used. [NOTE] Brother format data cannot be used. • By removing the table and using the cylinder bed, embroidery for tubular materials can be done effortlessly using an optional hoop. The maximum sewing area is H 450 mm x V 300 mm and it is possible to fully embroider the back of the jacket. By attaching cap frame device (optional), beautiful embroidering can be performed on ready made caps. • Its wide sewing area is H 450 mm x V 300 mm, and removal of the embroidery frame can be done easily. Also, convenient bobbin thread counter is equipped as standard use. BAS-416A- BES-1210AC 1