Brother International BAS-416A Instruction Manual - English - Page 60
ERROR, MESSAGES, receiving, BAS-PC/EM, system
View all Brother International BAS-416A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
S01: IDOODOEIDO. DOE Read end /Editor * After reading data is completed, the buzzer sounds 'beep' during fixed time. [START Set STR P. Co. O O N No.71OODOODOO 1 START (F 01 OOOOOOOO * / * N No. OOOOOOOOO 7. Press the key. The machine will enter sewing mode. 8. Press the key. The machine will start sewing. • ERROR MESSAGES when receiving data from BAS-PC/EM system NOTE: • After reading data is completed, the buzzer sounds 'beep' during fixed time. • While the error message is displayed, the buzzer sound 'beep'. Refer to page 97 "Error messages" for details. • When reading or sewingt the BAS-PC/EM system data (' lE' is displayed), setting repeat sewing cannot be done. If the following error message is displayed, press the key to clear the message and cancel the error. • When there is a communication circuit problem or the BAS-PC/EM is communicating with another machine. (F01: OOOOOOOO . OOO Off line / Editor (CAUSE) • The machine is not connected to the BAS-PC/EM system. • The editing system is not in the communication mode. • The editing system is turned off. • Cable disconnection between the BAS-PC/EM system and the machine. • The BAS-PC/EM system is in communication with the other machine. II If the communication line is not normal. /*FIJI:OOOOOOOO. EEO Line Busy /Editor / This message is displayed \ when the communication does not start while the line between the editing system and the machine \ is connected. (CAUSE) Breakdown in entire BAS-PC/EM system. (CURE) • Reset the BAS-PC/EM system to enter communication mode. • Repair the breakdown part. 50 BAS-416A • BES-1210AC