Brother International BAS-416A Instruction Manual - English - Page 18
previously
View all Brother International BAS-416A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CAUTION MOVING! File No. 1 The message, "CAUTION MOVING!" wil l appear along with four beeps, and the X and Y carriages will move to the center of the frame holder base or the same place as when the power was previously turned off. 5. The main menu is displayed. Needle POS. Error Turn Pulley 14 t 0 0 The needle bar is not in the proper position. Under this condition, it is impossible to move the needle bar to the proper position. When the needle bar stop position is not proper : 1. Align the 100° mark indicated on the pulley with the stop mark on the belt cover. ' CAUTION MOVING! 1 [ Press START key START CAUTION MOVING! (.F. i le No.0 1 8 2. When the needle bar comes to the proper position, the buzzer sounds 'beep' intermittently, and the messages, "CAUTION MOVING!" and "Press START key" are alternately displayed. NOTE: Check that the needle bar does not go down. If it does, set the needle bar in the proper needle bar stop position. Refer to page 34 "* The proper needle bar stop position". The mending LED of the first machine head will be lit. 3. Press the key. The message, "CAUTION MOVING!" will appear along with four beeps, and the X and Y carriages wil l move to the center of the frame holder base or the same place as when the power was previously turned off. 4. The main menu is displayed. .1 BAS-416A • BES-1210AC