Brother International BAS-416A Instruction Manual - English - Page 76
Setting, bobbin, thread, counter, breakage, sensor, <'7>
View all Brother International BAS-416A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5. Setting bobbin thread counter and thread breakage sensor • The display is based on counter system which the number is decreased after sewing one pattern is completed or is canceled. After counting is completed, it can show the messages with beep sound when starting next sewing. The counter number can be set from 0 to 99. Also, ON/OFF of thread breakage detection can be switched. • The bobbin thread counter can be set before data entry, during data input, and after data input. Set STR P. Co. u O N No.7100000000 (sewing mode) ' it St:OOOOOO Co:O1f N No.OOOOOOOOO THREAD SENSOR B. T. Count :DO/ O u ST. Count : OOOOOO (during suspension) 1. Press the key in sewing mode or during suspension. * When the key is pressed and the upper left indicator lights, thread breakage detection will operate. 2. Move the cursor on the desired row with the < < > key N and < l>> key. (The cursor will move.) A V 3. Enter the set times with the key and BACK F0RWAR) To clear stitch number counter To change cursor position on number (The cursor will appear and move.) To change current counter number to set value To exit from this setting 66 BAS-416A BES-1210AC