Brother International BAS-416A Instruction Manual - English - Page 47
switch, functions, printed, circuit, board
View all Brother International BAS-416A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4. Dip switch functions 4-1. Dip switch functions on main printed circuit board 4 M 22 12 34567 8 O tl O O NOTE: All dip switches are set to OFF when shipping. switch number SW1 SW2 SW3 SW4 SW5 SW6 SW7 state OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON function To set the communication speed for the tape reader or editing system to 9600 bps (The speed can be set to 38400 bps when SW7 is ON) To set the communication speed for the tape reader or editing system to 4800 bps (The speed can be set to 19600 bps when SW7 is ON) To store data of floppy disk in the memory To read and sew data of floppy disk (Data cannot be stored in the memory.) Even if another floppy disk is inserted during data reading or sewing of a character (pattern), machine will continue reading or sewing until it is done. If another floppy disk is inserted during data reading or sewing of a pattern (character), machine will stop operation at that point. To display the hoop name for the embroidery data while embroidering To display the embroidering speed while embroidering To set normal power mode To set Power Up hoop feed mode To set inching after thread trimming To cancel inching after thread trimming Use in conjunction with SW1 SW8 OFF To display Japanese ON To display English NOTE: • The power of the machine should be turned off before changing switch. If the power is not turned off, functions do not change. • Do not take out the floppy disk from the floppy disk drive during data reading and sewing. It may occur errors or hinder correct sewing. BAS-416A • BES-1210AC 37