Brother International BAS-416A Instruction Manual - English - Page 41
Functions, operation, panel
View all Brother International BAS-416A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3-2. Functions of keys on operation panel Use this key to; • Embroider the data stored in just the state it was in last embroidered. • Restart in the sewing mode during suspension. • Start after the carriage moved to sewing start point. Use this key to; T • Exit from each mode after floppy disk data entry, paper tape data entry or editing system data entry . END • Exit from the editing menu (after setting rotation, mirror or repeat sewing) and to exit from editing mode. • Exit from the needle bar setting mode and needle bar selecting mode. • Exit from setting THREAD SENSOR or bobbin thread counter. • Exit from the sewing mode. • Cancel error during sewing. Use this key to; • Enter data entry mode (from floppy disk, paper tape reader, editing system). • Read a pattern data of file name displayed on the upper row from floppy disk, paper tape reader or editing system. (This is invalid when data is already registered in selecting number.) • Enter current needle location as hoop feed point and to display its coordinates. • If data is not registered, read pattern data of the file name displayed on the upper row from floppy disk, paper tape reader, or BAS-PC/EM and to start automatic sewing. • Decide automatic stop in setting needle bar or not. ("M" (set) mark is displayed alternately.) CLEAR Use this key to; • Clear file data displayed on the upper row and the screen. • Cancel error. • Return set values of the registered number displayed on the upper row to default. • Return selecting needle number to default value. • Set hoop feed point in the center of the area in hoop feed mode. • Change current counter number to set value in setting bobbin thread counter. BAS-416A • BES-1210AC 31