Brother International BAS-416A Instruction Manual - English - Page 23
Thread, tension
View all Brother International BAS-416A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4-4. Thread tension ■ Needle thread tension O 0' IC) Correct sewing tension Upper stitch width Needle thread 70- 130 g Bobbin thread Lower stitch width If the needle thread tension is too high, turn the dial counterclockwise. If the needle thread tension is too low, turn the dial clockwise. Adjust the tension dial so that the needle thread is pulled to the back of the material, and the lower stitch width is about 1/3 of the upper stitch width. Adjusting the spring * The standard operation range of the thread take-up spring is about 6 - 8 mm. The standard tension at this time is about 0.07 N - 0.12 N (7 gf - 12 gf). * To adjust the operation range of the thread take-up spring, loosen the screw 0, and turn the upper thread tension assembly. * To adjust the tension of the thread take-up spring, fit a screwdriver into the slot, and turn the tension stud @ as appropriate. 0 6-8mm 0.07N-0.12N agf-1290 ■ Bobbin thread tension Correct bobbin thread tension (15-25g) " Use a tension gauge to adjust. Increase tension 1st Decrease tension BAS-416A• BES-1210AC 13